Properties Window

Properties Window displays information on the shape, layer, part drawing being selected.
Select property values to modify the content.


To display the Properties Window, click [Properties Window] on [View] menu.

Toolbar
Displayed when selecting a property for the coordinate/length/angle.

Displayed when selecting a property for the coordinate. Click to select a command from [Specify via screen], [Relative Point], and [2-Point Midpoint].
When selecting [Specify via screen], click any position on the drawing to enter the coordinates for the position.
When selecting [Relative Point] or [2-Point Midpoint], enter parameters in the same manner as auxiliary input of the coordinate parameter in Command Window.

Displayed when a property for the length is selected. Click to select [Distance Between Two Points] or [Shape Length] command.
When selecting any of these commands, input parameters in the same manner as auxiliary input of the coordinate parameter on Command Window.

Displayed when a property for the angle is selected. Click to select [2-Point Angle], [3-Point Angle], or [Shape Angle].
When selecting any of these commands, enter parameters in the same manner as auxiliary input of the coordinate parameters on Command Window.

Property Name
Displays the property name for the drawing, layer, or part drawing being selected.

Property Value
Displays the property value. Select the value and directly enter a value or input using an arithmetic equation to modify it.
Note that, however, details of items displayed in gray cannot be modified.

Property Details
Displays the details and roles of the property being selected.

Information displayed on Properties Window

The following three types of information can be displayed on Properties Window.

Shape

When selecting a shape while no command is being executed, information on the selected shape will be displayed. When selecting multiple shapes, only information common to all shapes will be displayed.

Paper, Part Drawing

Information on paper or part drawing being selected in the part drawing tree is displayed.

Layer

Information on a layer being selected in the layer tree or layer list is displayed. When selecting a layer group, information on all layers within the group will be displayed.

Related topics