ParallelDimensionShape Properties

Gets or sets a value indicating whether or not the dimension line is displayed between the auxiliary lines even when the arrow position is outside.

Get or set the position of the arrow.

Get the attribute collection.

Gets or sets a value indicating whether to automatically determine the position of the arrow according to the position of the dimension value when creating / changing the dimension line.

Dimension value Acquires or sets a value indicating whether automatic operation is performed.

Gets or sets a value indicating whether the character is bold.

Gets or sets the color of the dimension line.

Gets or sets the color number of the dimension line.

Get or set the dimension line angle (Degree).

Get or set the dimension value character string.

Placement or setting of dimension value Acquire or set the angle when angle type is arbitrary specification value.

Get or set the orientation angle type of the dimension value.

Gets or sets the distance from the dimension line of the dimension value.

Gets or sets a value indicating whether half width of the character of dimension value is full width.

Gets or sets the horizontal position of the dimension value.

Get or set the coordinates of the placement point of the dimension value.

Dimension value Acquires or sets free placement mode.

Gets or sets the vertical position of the dimension value.

Get or set the dimension value character string. ※ It may become unusable in the future. Please use DimensionText.

Get or set the coordinates of the placement point of the dimension value. ※ It may become unusable in the future. Please use DimensionTextPoint.

Acquire the document.

Acquire the parent's drawing group.

Acquire a partial diagram.

Acquires or sets the arrow size of the end point side.

Gets or sets a value that indicates whether the size of the pointed arrow selected on the end point side should be the same as the text height.

Acquires or sets the arrow type on the end point side.

Get or set the length of the outside dimension line that will be on the end point side.

Get or set the coordinates of the base point on the end point side.

Gets or sets the position indicated by the size of the pointed arrow selected on the end point side.

Gets or sets the angle (Degree) when the angle of the tip of the pointed arrow selected on the start point side is arbitrarily specified.

Acquire or set extension length of extension wire on the end point side.

Get or set the offset of the auxiliary line on the end point side (the distance from the base point to the starting point of the auxiliary line) or the length.

Gets or sets a value that indicates whether the dimension line will be extended to the position of the dimension value.

Get or set the character height of the character.

Get or set font name of character.

Acquires or sets the second added character string.

Acquires or sets the first added character string.

Acquires or sets the horizontal placement type of the medium appended character string.

Acquires or sets the size ratio of medium added character string (ratio to dimension value character (height, width, character spacing)).

Medium Additional character string Get or set the stage type.

Get or set the vertical placement type of medium appended character string.

Gets a value indicating whether it is a complex figure.

Get a value indicating whether it is a temporary shape.

Get or set the layer.

Get or set the ID of the layer.

Get or set the rounding value of the length dimension value.

Gets or sets the scale of the length dimension value.

Get or set the notation type of length dimension value.

Get or set the line type of the dimension line.

Get or set the line type number of the dimension line.

Get or set the line width of the dimension line.

Get or set the line width number of the dimension line.

Gets or sets the processing mode when the dimension value and the arrow do not fit inside the dimension line.

Acquires the figure number.

Retrieves or sets the first appended character string.

Acquires or sets the second appended character string.

Get or set the horizontal placement type of postscript added string.

Get or set the size ratio of post-appended character string (ratio to dimension value character (height, width, character spacing)).

Retrieves or sets the number of stages of post-appended character string.

Get or set the vertical alignment type of the post-appended character string.

Acquires or sets the precision (length of digits after the decimal point) of the length dimension value.

Get or set pre-append string.

Get or set auxiliary line angle (Degree) .

Acquires or sets the color of the dimension extension line.

Gets or sets the color number of the extension line.

Get or set the extension line length (length from the base point to the start point of the dimension line).

Acquires or sets the line type of the dimension extension line.

Acquires or sets the line type number of the dimension extension line.

Gets or sets the line width of the dimension extension line.

Gets or sets the line width number of the extension line.

Get or set the method of specifying the length of the extension line.

Get the record ID.

Dimension value Gets or sets the 3-digit delimiter character type.

Gets or sets a value indicating whether to display zeros before the decimal point of the dimension value.

Gets or sets a value indicating whether to display the dimension value.

Gets or sets a value indicating whether or not the dimension line on the end point side is displayed.

Gets or sets a value indicating whether or not the auxiliary line on the end point side is to be displayed.

Gets or sets a value indicating whether the dimension line on the start point side is displayed.

Gets or sets a value indicating whether to display the auxiliary line on the start side.

Gets or sets a value indicating whether zero before the decimal point of the tolerance is displayed.

When the tolerance difference is two-stage display and the second row is zero - Acquire or set a value indicating whether or not to add a sign.

Get or set a value indicating zero notation 1 according to the notation type of tolerance difference.

Get or set a value indicating zero notation 2 according to the notation type of tolerance difference.

Gets or sets a value indicating whether to display zero after the decimal point of the tolerance difference.

Gets or sets a value indicating the zero notation 1 according to the notation type of the dimension value.

Gets or sets a value indicating the zero notation 2 according to the notation type of the dimension value.

Gets or sets a value indicating whether to display zeros after the decimal point of the dimension value.

Get or set the tilt angle (Degree) of the character.

Get or set the character spacing of letters.

Get or set the size of the arrow on the starting point side.

Gets or sets a value that indicates whether the size of the pointed arrow selected on the start point side should be the same as the text height.

Get or set the arrow type at the start point side.

Gets or sets the length of the outer side of the dimension line that becomes the starting point side.

Get or set the coordinates of the starting point base point.

Gets or sets the position indicated by the size of the pointed arrow selected on the start point side.

Gets or sets the angle (Degree) when the angle of the tip of the pointed arrow selected on the start point side is arbitrarily specified.

Gets or sets the extension length of the extension line of the start point side.

Get or set the offset of the auxiliary line on the start side (the distance from the base point to the starting point of the auxiliary line) or the length.

Get or set the color of the character.

Get or set the color number of the character.

Acquire or set tolerance 1.

Acquire or set tolerance 2.

Gets or sets a value indicating whether or not tolerance is enclosed in parentheses.

Gets or sets the horizontal alignment type of tolerance difference.

Acquires or sets the tolerance difference accuracy (number of digits after the decimal point).

Get or set the size ratio of letters of tolerance (ratio to dimension value characters (height, width, character spacing)).

Get or set tolerance type.

Gets or sets the vertical alignment type of the tolerance difference.

Gets or sets a value that indicates whether to arbitrarily specify the angle of the tip of the pointed arrow selected on the end point side.

Gets or sets a value indicating whether "color of the extension line is different from the color of the dimension line".

Gets or sets a value indicating whether or not the line type of the dimension extension line uses a line type different from the line type of the dimension line.

Gets or sets a value indicating whether or not the line width of the dimension extension line uses a line width different from the line width of the dimension line.

Gets or sets a value that indicates whether to arbitrarily specify the angle of the tip of the pointed arrow selected on the start point side.

Gets or sets a value indicating whether "color of text is different from dimension line".

Get or set the character width ratio of characters.