DxfLoadConverterSettings Properties |
The DxfLoadConverterSettings type exposes the following members.
Properties| Name | Description | |
|---|---|---|
 | AutoLayoutScale |
Get or set whether to automatically adjust the layout scale of the partial drawing layout.
|
| ConvertPolylineWidthToHatch |
Get or set whether to convert a wide polyline into hatching.
|
| ConvertWhiteToBlack |
Get or set whether to convert white to black.
|
| CopyTemplateSettingsMode |
Get or set whether to copy graphic settings etc from RootPro CAD template at the same time as loading.
|
| DefaultLinewidthNumber |
Get or set the default value of line width.
|
| ExplodeBlockAlways |
Get or set whether to decompose the (always) block.
|
| ExplodeByBlockEntitiesBlock |
Get or set whether to decompose blocks with shapes where ByBlock is set.
|
| ExplodeDimension |
Get or set whether or not to decompose dimensions.
|
| ExplodeErrorSolidHatch | Obsolete.
Get or set whether to decompose if filled hatches can not be read. * It can not be used in the current version. It may become unusable in the future.
|
| ExplodeLead |
Get or set whether to decompose the leader line.
|
| ExplodeMultiText |
Get or set whether to decompose multiline text.
|
| ExplodeZeroAndOtherLayerEntitiesBlock |
Get or set whether to decompose a block consisting of graphics with layers other than layer 0 and layer 0.
|
| Landscape |
Get or set a value indicating whether the paper is landscape or portrait.
|
| LayoutMarginX |
Get or set the X direction margin of the placement origin of the partial drawing layout.
|
| LayoutMarginY |
Get or set the margin in the Y direction of the placement origin of the partial drawing layout.
|
| LayoutOriginMode |
Get or set the base origin criteria of the partial drawing layout.
|
| LayoutScaleDenominator |
Get or set the denominator of the layout scale of the partial map layout.
|
| LayoutScaleNumerator |
Get or set the numerator of the layout scale of the partial map layout.
|
| ModelSpaceOnly |
Get or set whether to load only the model space.
|
| PaperHeight |
Get or set the height of the paper.
|
| PaperType |
Get or set the paper size type.
|
| PaperWidth |
Get or set the width of the paper.
|
| PlaceEmptyLayerAllZeroLayerEntitiesBlock |
Blocks consisting only of figures other than layer 0 are to be placed or set as "without layer".
|
| SolidHatchTransparency |
Get or set transparency of filled hatching.
|
| SolidHatchTransparencyMode |
Get or set whether to specify transparency of fill hatching.
|
| TemplateFilePath |
At the same time as loading RootPro Gets or sets the template file path to copy CAD figure settings and so on.
|
| TextHeightAdjustMode |
Get or set the character height adjustment mode.
|
| TextHeightScale |
Get or set the adjustment ratio of character height.
|
| ThresholdHatchPatternToSolid |
Threshold value of the number of exploded figures when changing hatching pattern to SOLID (fill). 0: It does not change.
|
See Also